Differences

This shows you the differences between two versions of the page.

--- en:positive_aligner [2023/02/08 11:29] – onyxadmin
+++ en:positive_aligner [2023/05/31 07:45] (current) – onyxadmin
@@ Line 2: / Line 2: @@
 ----
-<WRAP center round todo 100%>
+Since 2022, various manufacturers (e.g. [[http://www.itgraphy.com/ENG/bbs/board.php?bo_table=partner_s|Graphy]], South Korea) have been offering CE-certified resins for direct aligner printing using the DLP print process. OnyxCeph³(tm) supports this manufacturing alternative by providing the optional features [[positive_aligner#Trimline|Trimline]] and [[positive_aligner#3D export|3D export of positive aligners]].\\
+\\
+<WRAP center hide todo 100%>
 This functionality is still in development and only available as preview version for testing. Please verify all results and models exported from the planning as usual.
 </WRAP>
@@ Line 12: / Line 14: @@
 [[trimline_pm#Trimline Correction|{{ :tl_correction1.png?800&direct  }}]]\\
 \\
-This line is now part of the project, will be automatically adapted when switching to other steps, and is also visualized on the models when switching to the 3D export.
+This line is now part of the project, will be automatically adapted when switching to other steps, and is also visualized on the models when switching to the 3D export.\\
+<WRAP nicebox orange center important>
+**Note:** The [[trimline_pm|Trim Line panel]] in module [[:aligner_3d|Aligner 3D]] has to be activated on the client by a patch file which will be provided on [[contact|request]].
+</WRAP>
 ===== 3D Export =====
-In the 3D Export window, please set the following configuration and save this as a separate export preset:
+As of Release 3.2.195, there is a separate export window for the export of positive aligner splints, which is opened via the menu item [Aligner Splint Export] of the 3D export icon:
-  *  Trim the model with the planes down to the height of the trimline
+{{:alignersplintexport.png?nolink}}
-  *  Minimum Blockout is required (0.5 mm)
-  *  Labeling positive onto the teeth
-  *  No print-preprocessing activated
-In the bottom panel for the serial export, a new option "Tray" is available for the positive Aligner. This option is missing when there is no trimline, the feature is not enabled as a beta test or the module BiteSplint is missing, which is required for the positive aligners.
+The required Expot settings can be made in the window. Optionally, the rail thickness can also be modified in proportion to the planned range of motion.\\
-According to first feedback the thickness should be set to something around 0.4-0.6 mm. The rounding can currently only be used for trays thicker than 0.5-0.6 mm, depending on the model. Please note that the settings are currently not saved and always reset tothe default values.
+{{:ase_window.png?nolink}}
-===== Additional objects =====
+//Note//: \\
+According to initial user feedback, a thickness of 0.4...0.6 mm and a block-out of min. 0.5 mm should be set, and smoothing should only be applied from thicknesses of about 0.5 mm.\\
-How 3D objects should be added to the arch/s or to the aligner/s can be indirectly controlled by the name of the additional object:
+The possibility of adding support material is intended only as a fallback option for printers whose print preparation does not provide a suitable option for this.\\
-  * if the name contains the term "tooth", the element is added to the model normally, including blocking out (e.g. for copied teeth).
-  * if the name contains a "+" or "-", the object will be added to or subtracted from the splint (this can be used to fill in wings instead of generating them hollow, or to add holes to the splint)
-  * otherwise as before, i.e. like a part of the model without blocking out
-----
+<WRAP nicebox orange center important>
+**Note:** The serial 3D export of positive aligners additionally requires the activation of [[bitesplint_3d|module Bite Splint 3D]], since its calculation algorithms are used.
+</WRAP>
+\\
-^ Note for Testing                                                                                                                                                                                                                                ^
-| This version is available as a preview to allow first tests with the material and is not part of the official product. The user interface and workflows will be greatly reworked and enhanced with more options in the official release   |